Customizing camera operation, Deactivating the af-assist beam, And subjects are enlarged (= 53) – Canon PowerShot SX720 HS User Manual
Page 53
53
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Recording Movies with Subjects at the Same Size
Shown before Recording
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow the image to be kept as horizontally
level as possible and for correction of significant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel auto leveling.
●
Set [ Auto level] to [Disable] as
described in “Deactivating Auto Level”
●
Follow step 1 in “Deactivating Image
Stabilization” (= 52) to access the
[IS Settings] screen.
●
Choose [Dynamic IS], and then choose
●
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
●
[Dynamic IS] is not available when [IS Mode] is set to [Off]
(= 52).
●
When the movie quality is [
], it is set to [Standard] and
cannot be changed.
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as follows.
For instructions on menu functions, see “Using the Menu Screen”
Deactivating the AF-Assist Beam
Still Images
Movies
A lamp lights up to help you focus when you press the shutter button
halfway in low-light conditions. You can deactivate the lamp.
●
Press the [
] button, choose
[AF-assist Beam] on the [ ] tab, and
then choose [Off] (= 29).
●
To restore the original setting, repeat this
process but choose [On].