Yamaha CVP-705B - Manual (Page 54)

CVP-709/CVP-705 Owner’s Manual 54
V
oice
s – Pla
yin
g the K
eyboar
d
–
The instrument uses advanced digital technology to recreate the legendary sound of vintage organs. Just as
on a traditional organ, you can create your own sound by increasing and decreasing the levels of the flute
footages. The created Voice can be saved for future recall.
NOTE
The term “footage” is a reference to the sound generation of traditional pipe organs, in which the sound is produced by pipes of different
lengths (in feet).
1
On the Voice Selection display, select the desired Organ Flutes Voice.
Touch the [Organ Flutes] tab in the [Organ] category, then select the desired Organ Voice.
2
Return to the Home display, then touch (Organ Flutes) located at the upper
right of the Voice name to call up the Organ Flutes Voice Edit display.
3
Slide the Footage levers to adjust the footage settings.
The footage settings determine the basic sound of the Organ Flutes.
If you want, you can select the Organ type, change the settings such as Rotary Speaker and
Vibrato.
NOTE
You can also make Effects and EQ settings. For details, refer to the Reference Manual on the website (page 9).
4
Touch (Save) and save the created Organ Voice.
For instructions on saving, refer to page 33.
NOTICE
The settings will be lost if you select another Voice or turn the power to the instrument off without executing the
Save operation.
NOTE
In addition to the Organ Flutes Voices, other Voices can be edited by calling up the Voice Edit display after selecting the
desired Voice. For details, refer to the Reference Manual on the website (page 9).
Creating Original Organ Flutes Voices
Organ Type Specifies the type of organ tone generation to be simulated.
Volume Determines the volume of the entire Organ Flutes sound.
Rotary
Speaker Alternately switches between the slow and fast rotary speaker speeds. This parameter is
available only when an effect which contains “Rotary” or “Rot” in its name is applied.
Vibrato Turns the vibrato on or off, and allows you to adjust the vibrato depth and vibrato speed.
Response Adjusts the response speed of both the Attack and Release portions of the sound.
Attack Switches between two different Attack modes: First and Each, and determines the length of
the Attack sound.
3