Yamaha CVP-705B - Manual (Page 42)

CVP-709/CVP-705 Owner’s Manual 42
Bas
ic O
per
at
ion
s
From the Balance display called up via [Menu] → [Balance], you can adjust the volume balance among the
keyboard parts (Main, Layer, Left), the Style, the Song, the microphone sound, and the sound input via
[AUX IN] jack. Slide your finger vertically for each part to adjust the volume. You can also adjust the
volume balance of sound input via the USB wireless LAN adaptor, if one is connected.
Since the volume of MIDI Songs and Audio Songs are handled individually, you need to set the volume
balance for each case (when a MIDI Song is selected, or when an Audio Song is selected).
NOTE
A USB wireless LAN adaptor may not be included depending on your area.
While holding the C7 key (right-most key on the keyboard), turn the power on. This restores all of the
settings to their factory defaults.
NOTE
You can also restore the factory default value of specified settings or delete all files/folders in the User memory on the display called up
via [Menu]  [Utility]  [Factory Reset/Backup]  page 1/2. For details, refer to the Reference Manual on the website (page 9).
If you want to restore the default value of any parameter you’ve changed, touch and hold the value on the
display (page 30).
Fine tuning the pitch
By default, the pitch of the entire instrument is set to 440.0 Hz according to equal temperament. This setup can be
changed from the display called up via [Menu] → [Tuning]. For details, refer to the Reference Manual on the website
(page 9).
Hz (Hertz):
This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second.
This instrument is tuned to 440.Hz by default to conform to the conventional tuning value (440.0Hz) of acoustic pianos.
Adjusting the Volume Balance
Restoring the Factory-programmed Settings
+
C7