ProSoft Technology RLX2-IFH9E - Manual (Page 36)

Start Here RLX2-IFHxE ♦ Industrial Wireless
User Manual Industrial Frequency Hopping Ethernet Radios
Page 36 of 81 ProSoft Technology, Inc.
May 28, 2014
1.9.2 Viewing Signal Strength
After a network is configured, you can monitor the signal strength of the Remote
radios.
1. From the ControlScape FH Main Menu, choose Diagnostic > Network >
the network by name
2. After the network is displayed, double click the Remote radio to open the
Radio Status dialog box. This dialog box shows information about the
radio, including serial number, hardware and firmware information, and
signal strength. The appearance of this dialog box depends on the radio
model and type.
1.9.3 Getting Radio Status
You can query a radio to view its settings on the Configuration PC. You can
query Radios directly (through a cable connected to the Configuration PC) or
remotely (through communication with the Master radio cabled to the
Configuration PC).
To directly query a radio (either Master or Remote), connect an Ethernet cable
from the radio to the PC, See Plug In the Cables (page 25). From the
ControlScape FH Setup/Application choose Diagnostic > Radio.