ProSoft Technology RLX2-IFH9E User Manual
Page 21
RLX2-IFHxE ♦ Industrial Wireless
Start Here
Industrial Frequency Hopping Ethernet Radios
User Manual
ProSoft Technology, Inc.
Page 21 of 81
May 28, 2014
Every radio network requires one Master radio, and one or more Remote radios.
When you create a new network, ControlScape FH automatically populates the
network with a pair of radios, as shown in the following illustration.
1. Double-click the Master Radio icon to open the Master Radio dialog box.
The default settings work with many devices without modification; however you
need to assign an IP address, subnet mask and default gateway for each radio
on the network. If you are using Serial Protocol Encapsulation to transmit serial
data over the wireless network, you may also need to know the communication
parameters to use if the wired device requires different settings. This information
is normally available in the user manuals for the device.