ProSoft Technology RLX2-IFH9E - Manual (Page 22)

Start Here RLX2-IFHxE ♦ Industrial Wireless
User Manual Industrial Frequency Hopping Ethernet Radios
Page 22 of 81 ProSoft Technology, Inc.
May 28, 2014
Note: The PC or laptop you use to configure the radios must be on the same subnet as the radio.
All ProSoft radios are shipped with a default IP address and Network Mask. The default IP
address is 192.168.0.254 with a subnet mask of 255.255.255.0.
Certain devices may require additional configuration, if the default configuration
is not adequate for reliable data transfer. For example, you may need to adjust
transmit power to reduce interference with other devices transmitting on the
same frequency, or to fine-tune the packet settings to accommodate timing and
packet size requirements for an industrial protocol.
2. Click Advanced to show these additional options.
3 This will open the Master Radio configuration window.