ProSoft Technology RLX2-IFH9E User Manual
Page 25
RLX2-IFHxE ♦ Industrial Wireless
Start Here
Industrial Frequency Hopping Ethernet Radios
User Manual
ProSoft Technology, Inc.
Page 25 of 81
May 28, 2014
9 When you have finished making your selections, click OK to save the radio
configuration.
Plug in the Cables
You must transfer these settings to the Master radio in order for these changes to
take effect. ControlScape FH updates
the radio’s internal settings through the
Ethernet connection between your computer and the radio.
Important: The serial port on the bottom of the radio, labeled RS-232, is reserved for connections
to external network devices, and cannot be used to configure the radio.
Important: Please allow sufficient time for the radio to power up and respond to discovery or
configuration requests. In some instances, the radio may require up to 90 seconds to become
responsive.
1 Connect the AC power adapter cord to the port labeled 10 - 24 VDC 6W on
the bottom of the radio, and then plug the power adapter into an electrical
outlet.