ProSoft Technology MVI46-DNP - Manual (Page 57)

Reference MVI46-DNP ♦ SLC Platform
Master/Slave Communication Module
ProSoft Technology, Inc. Page 57 of 143
August 23, 2007
ƒ Support for the storage and transfer of all DNP data types across the
backplane
ƒ Communication parameters
o
Address: 0 to 65534 (slave mode)
o
Baud rate: 110 to 115K
o
Parity: none, data bits: 8, Stop bit: 1
o
RTS on delay: 0 to 65535 milliseconds
o
RTS off delay: 0 to 65535 milliseconds
ƒ DNP protocol specifications
o
DNP 3.0 slave level 2 minimum
o
DNP 3.0 master level 2 minimum
ƒ Unsolicited responses supported on slave ports
5.1.2 General Specifications
ƒ Single Slot – 1746 backplane compatible (Local or extended I/O rack only.
Remote rack not supported)
ƒ The module is recognized as an Input/Output module and has access to
processor memory for data transfer between processor and module using
M0/M1 files
ƒ Ladder Logic is used for data transfer between module and processor.
Sample ladder file included
ƒ Configuration data obtained from configuration text file downloaded to
module. Sample configuration file included
5.1.3 Hardware Specifications
Specification Description
Backplane Current Load 800 ma @ 5V (from backplane)
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature –40 to 85°C (–40 to 185°F)
Shock 30g operational, 50g non-operational
Relative Humidity 5% to 95% (non-condensing)
Vibration 5 g from 10150 Hz
Processor Compatible with Rockwell Automation SLC 5/02 M0/M1
capable processors or newer
LED indicators Module status, Backplane transfer status, Application
status, Serial activity and error LED status
Debug/Configuration port (CFG)
CFG Port (CFG) RJ45 (DB-9M with supplied cable)
RS-232 only
Configuration Connector RJ45 RS-232 Connector (RJ45 to DB-9 cable shipped
with unit)
Application Ports
Application Serial port (PRT1, PRT2)
(Serial Modules) Two RJ45 RS-232/422/485 Application ports