ProSoft Technology MVI46-DNP - Manual (Page 31)

Configuring the Module MVI46-DNP ♦ SLC Platform
Master/Slave Communication Module
ProSoft Technology, Inc. Page 31 of 143
August 23, 2007
2 Press [>] key (Send Module Configuration). The message "Press Y to
confirm configuration send!" is displayed at the bottom of the screen.
3 Press [Y]. The module will automatically start a Zmodem file transfer. The
configuration file will be stored in the default file transfer folder on your PC.
ƒ Note: ProSoft Technology suggests that you download the configuration file pre-
loaded on your module. However, configuration files are also available on the
ProSoft CD as well as the ProSoft Technology web site at
http://www.prosoft-
technology.com .
When the configuration file has been transferred to your PC, the dialog box
will indicate that the transfer is complete.