ProSoft Technology MVI56-GEC - Manual (Page 92)

Reference MVI56-GEC ♦ ControlLogix Platform
User Manual Generic ASCII Ethernet Communication Module
Page 92 of 108 ProSoft Technology, Inc.
October 8, 2010
Object in GSCInStat Block Offset
Start Description
Client[1].State 196 This flag defines the current state of the client.
Client[1].IP 197 This double-word value contains the IP address of the
server connected to the client.
Client[1].Port 199 This word value contains the port address for the server
connected to the client.
Client[1].RxCount 200 This status value contains the total number of messages
received by the client.
Client[1].RxOverflow 201 This status value contains the total number of messages
received that exceed the user specified buffer size for the
client.
Client[1].TxCount 202 This status value contains the total number of messages
transmitted by the client.
Client[1].TxOverflow 203 This status value contains the total number of transmit
messages that exceeded the user specified maximum
buffer size for the client.
Client[1].spare 204 Reserved for future use
Client[2].Connected 205 This flag defines if the client is utilized and connected to
a server. A value of 0 indicates the client is not
connected and can be utilized for a connection. Any
other value indicates the client is connected and being
used.
Client[2].State 206 This flag defines the current state of the client.
Client[2].IP 207 This double-word value contains the IP address of the
server connected to the client.
Client[2].Port 209 This word value contains the port address for the server
connected to the client.
Client[2].RxCount 210 This status value contains the total number of messages
received by the client.
Client[2].RxOverflow 211 This status value contains the total number of messages
received that exceed the user specified buffer size for the
client.
Client[2].TxCount 212 This status value contains the total number of messages
transmitted by the client.
Client[2].TxOverflow 213 This status value contains the total number of transmit
messages that exceeded the user specified maximum
buffer size for the client.
Client[2].spare 214 Reserved for future use
Client[3].Connected 215 This flag defines if the client is utilized and connected to
a server. A value of 0 indicates the client is not
connected and can be utilized for a connection. Any
other value indicates the client is connected and being
used.
Client[3].State 216 This flag defines the current state of the client.
Client[3].IP 217 This double-word value contains the IP address of the
server connected to the client.
Client[3].Port 219 This word value contains the port address for the server
connected to the client.