ProSoft Technology MVI56-GEC - Manual (Page 34)

Configuring the MVI56-GEC Module MVI56-GEC ♦ ControlLogix Platform
User Manual Generic ASCII Ethernet Communication Module
Page 34 of 108 ProSoft Technology, Inc.
October 8, 2010
2.5 Downloading the Project to the Module Using a Serial COM port
For the module to use the settings you configured, you must download (copy) the
updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
module.
2 Open the Project menu, and then choose M
ODULE /D OWNLOAD
. The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid COM port, the Download
dialog box will open.
3 Choose the COM port to use from the dropdown list, and then click the
D OWNLOAD
button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the Download dialog
box will display the message Module Running.