ProSoft Technology MVI56-GEC - Manual (Page 20)

Start Here MVI56-GEC ♦ ControlLogix Platform
User Manual Generic ASCII Ethernet Communication Module
Page 20 of 108 ProSoft Technology, Inc.
October 8, 2010
1.7.3 Configuring the RSLinx Driver for the PC COM Port
If RSLogix is unable to establish communication with the processor, follow these
steps.
1 Open RSLinx.
2 Open the C OMMUNICATIONS
menu, and choose C
ONFIGURE D RIVERS
.
This action opens the Configure Drivers dialog box.
Note: If the list of configured drivers is blank, you must first choose and configure a driver from the
Available Driver Types list. The recommended driver type to choose for serial communication with
the processor is RS-232 DF1 Devices.