ProSoft Technology MVI56-GEC - Manual (Page 63)

MVI56-GEC ♦ ControlLogix Platform Diagnostics and Troubleshooting
Generic ASCII Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 63 of 108
October 8, 2010
4.2.4 Network Menu
From the IEC-870-5-104 Server menu press [@] to display the IEC-870-5-104
Network menu screen. The Network menu allows you to send, receive, and view
the WATTCP.CFG file that contains the IP and module addresses, and other
network information.
Transferring WATTCP.CFG to the Module
Press [R]
to transfer a new WATTCP.CFG file from the PC to the module. Use
this command to change the network configuration for the module (for example,
the module’s IP address).
Press [Y]
to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
Transferring WATTCP.CFG to the PC
Press [S]
to transfer the WATTCP.CFG file from the module to your PC.
Press [Y] to confirm the file transfer, and then follow the instructions on the
terminal screen to complete the file transfer process.
After the file has been successfully transferred, you can open and edit the file to
change the module’s network configuration.