ProSoft Technology MVI56-GEC - Manual (Page 23)

MVI56-GEC ♦ ControlLogix Platform Start Here
Generic ASCII Ethernet Communication Module User Manual
ProSoft Technology, Inc. Page 23 of 108
October 8, 2010
1.9 Connecting your PC to the Module
With the module securely mounted, connect your PC to the Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null Modem Cable.
1 Attach both cables as shown.
2 Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3 Attach the other end to the serial port on your PC.