ProSoft Technology MVI56-GEC - Manual (Page 32)

Configuring the MVI56-GEC Module MVI56-GEC ♦ ControlLogix Platform
User Manual Generic ASCII Ethernet Communication Module
Page 32 of 108 ProSoft Technology, Inc.
October 8, 2010
2.3.6 Swap Tx Data Bytes
Yes or No
This parameter determines if the data to be transmitted by the module will have
the byte order of the data swapped. If the parameter is set to No, no byte
swapping will occur. If the parameter is set to Yes, the odd byte will be swapped
with the even byte in each word of data received.