beautypg.com

Ok led – module health, All leds red, Qts-clx-apacs module 4-character display – ProSoft Technology CLX-APACS User Manual

Page 47: Rslogix 5000

background image

QTS-CLX-APACS Page

41

OK LED – Module Health

The OK LED indicates module health. A red LED indicates that module startup
diagnostics have failed or a major module fault has occurred. Green indicates that the
module has passed all power-up diagnostics and is functioning normally.

All LEDs Red

If all three LEDs are solid red and the 4-character display shows something like M#66,
this indicates that a fatal error has occurred. Refer to page 43 for information on clearing
fatal errors. If a fatal error occurs, clear the fatal error, save the file and contact
Technical Support.

QTS-CLX-APACS Module 4-Character Display

The 4-character display shows the firmware in the module, either APACS-MON or
APACS-MAS, followed by the firmware version number, and the Module Name you
entered in the module configuration.

If there is no configuration in the module, the display shows instead of the
module name.

RSLogix 5000

If there is a problem with the connection to the module, the connections are shown with
yellow triangles in the I/O Configuration tree

The Connection tab for each connection to the QTS-CLX-APACS module displays an
error message if there is a problem with the connection to the module.