ProSoft Technology CLX-APACS - Manual (Page 38)

Page 32 QTS- CLX-APACS March 2015
TIP
If the ControlLogix loses communication with the QTS-CLX-APACS, it
sets the first four bytes of connection 0 to FF hexadecimal (11111111
binary).
Monitor these four bytes to determine if there is a problem.
Setting the Module Name
To set the module name, right click on the QTS-CLX-APACS at the root of the tree and
select Edit Module Properties.
The QTS-CLX-APACS Module Properties dialog appears.