ProSoft Technology CLX-APACS - Manual (Page 30)

Page 24 QTS- CLX-APACS March 2015
In this example, the module is in rack 1slot 6. The alias is for an analog input from
channel 2 on the module, which is mapped to ControlLogix address input data at offset 1
of connection 8.
To build the alias name, ClxApacsMonCfg prefixes the name with the module name and
an underscore. It prefixes the address with the RSLinx path specifier.
Opening a Configuration File
To open a configuration file, select File/Open..
This does not change the configuration in the module; the configuration in the module
changes only when you download.
Clearing the Configuration
To clear the configuration in the program, select File/New.
This does not change the configuration in the module; the configuration in the module
changes only when you download.
Setting the RSLinx Path
Select Tools/Set RSLinx Path… to assign or change the current RSLinx path.
This may be useful if, for example, you have more than one QTS-CLX- APACS module.
Changing the Module Mode
Select Tools/Change Module Mode… to switch a QTS-CLX-APACS module between
monitor and master modes, or to update the module firmware (see page 44)
Select the firmware to download and click Apply. When the download is complete,
ClxApacsMonCfg displays the version of the firmware downloaded.