ProSoft Technology CLX-APACS - Manual (Page 15)

QTS-CLX-APACS Page 9
2. Place another ENBT on the Ethernet under the first ENBT.
Disable keying, set the Rack Connection to None, set the slot to 16.
The IP Address doesn't matter, e.g., Private Network 192.168.1.78
Name this ENBT what you want the Controller Tag Name to be, e.g., APACS.
TIP
Make this name the same as the name you give the module in the
configuration program (monitor or master).
This name will prefix all aliases.
This name will appear on the module’s 4-character scrolling display so
you can easily identify it if you have more that one QTS-CLX- APACS
module.