ProSoft Technology CLX-APACS - Manual (Page 43)

QTS-CLX-APACS Page 37
In this example, the alias is for an analog output on channel 1 of the module in rack 1 slot
6, which is mapped to ControlLogix address output data at offset 0 of connection 8.
Opening a Configuration File
To open a configuration file, select File/Open..
This does not change the configuration in the module; the configuration in the module
changes only when you download.
Clearing the Configuration
To clear the configuration in the program, select File/New.
This does not change the configuration in the module; the configuration in the module
changes only when you download.
Setting the RSLinx Path
Select Tools/Set RSLinx Path… to assign or change the current RSLinx path.
This may be useful if, for example, you have more than one QTS-CLX- APACS module.
Changing the Module Mode
Select Tools/Change Module Mode… to switch a QTS-CLX-APACS module between
monitor and master modes, or to update the module firmware (see page 44).
Select the firmware to download and click Apply. When the download is complete,
ClxApacsMasCfg displays the version of the firmware downloaded.