ProSoft Technology MVI69-HART - Manual (Page 52)

Ladder Logic MVI69-HART ♦ CompactLogix Platform
User Manual HART Multi-drop Master Communication Module
Page 52 of 169 ProSoft Technology, Inc.
March 29, 2012
Auto-Poll Data (HARTAutoPoll)
This data object contains the auto-poll data ready to be used by the user (multi-
drop or point-to-point). First define where the auto-poll data will copied to in the
MVI69-HART database using the DB AutoPoll Address parameter in the
configuration file. Then copy the data from the MVI69-HART database into the
processor memory (HARTAutoPoll object) using the ladder logic.
Name Data Type Description
Auto_Poll_CMD_Status SINT Auto-Polling command status bits
Last_Status_Byte SINT Last first status byte received from device
Last_Second_Status_Byte SINT Last second status byte received from device
Manufacture_ID_Code SINT
Device_Type_Code SINT
Min_Preambles SINT Minimum Number of Preambles
Universal_CMD_Major SINT Universal Command Major Rev#
Device_Rev_Level SINT
Software_Rev_Level SINT
Hardware_Rev_Level SINT
Device_Flags SINT
Device_ID SINT[3]
Min_Preambles_Resp SINT
Max_Number_Devices SINT
Config_Change_Count INT
Ext_Dev_Status SINT Extended Field Device Status
Primary_Var_Units SINT Primary Units Code
Secondary_Var_Units SINT Secondary Units Code
Tertiary_Var_Units SINT Tertiary Units Code
Quaternary_Var_Units SINT Quaternary Units Code
Tag_Name SINT[8]
Tag_Descriptor_Data SINT[3]
Transd_Serial_Num SINT[3]
Transd_limits SINT
PV_Alarms SINT
PV_Transfer SINT
PV_URLLRV_Units SINT
Write_Protection_Code SINT
Private_Label_Code SINT
PV_Analog_Ch_Flag SINT
PV_value REAL Primary variable value
SV_value REAL Secondary variable value
TV_value REAL Tertiary variable value
QV_value REAL Quaternary variable value
U_trans_limit REAL Upper transducer limit
L_trans_limit REAL Lower transducer limit
Min_span REAL Minimum span
PV_URV REAL PV upper range value
PV_LRV REAL PV lower range value
PV_damp REAL PV dampining value (in seconds)