ProSoft Technology MVI69-HART - Manual (Page 114)

Reference MVI69-HART ♦ CompactLogix Platform
User Manual HART Multi-drop Master Communication Module
Page 114 of 169 ProSoft Technology, Inc.
March 29, 2012
Bit 7 of First Byte = 0
Command Error
Bit 0
Primary Variable Out of Limits
Command Specific Errors
8 Update Failed
Update In Progress
Set to Nearest Possible Value
9 Applied Process Too High
Lower Range Value Too High
Not in Fixed Current Mode
10 Applied Process Too Low
Lower Range Value Too Low
Multi-drop Not Supported
11 In Multi-drop Mode
Invalid Transmitter Variable Code
Upper Range Value Too High
12 Invalid Unit Code
Upper Range Value Too Low
13 Both Range Values Out of Limits
14 Pushed Upper Range Value Over Limit
Span Too Small