ProSoft Technology MVI69-DFNT - Manual (Page 55)

MVI69-DFNT ♦ CompactLogix or MicroLogix Platform Ladder Logic
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 55 of 167
May 14, 2014
3.4 Adding the Module to an Existing MicroLogix Project
If you are installing and configuring the module with a MicroLogix controller,
follow these steps. If you are using a CompactLogix controller, refer to the
previous section.
The first step in setting up the processor ladder file is to define the I/O type
module to the system. Start RSLogix 500, and follow these steps:
1 In RSLogix, open your existing application, or start a new application,
depending on your requirements.
2 Double-click the I/O C ONFIGURATION icon located in the Controller folder in the
project tree. This action opens the I/O Configuration dialog box.
3 In the I/O Configuration dialog box, select "O THER - R EQUIRES I/O C ARD T YPE
ID" at the bottom of the list in the right pane, and then double-click to open
the "Other" type IO card dialog box.