Connecting your pc to the module – ProSoft Technology MVI69-DFNT User Manual
Page 23

MVI69-DFNT ♦ CompactLogix or MicroLogix Platform
Start Here
EtherNet/IP Client/Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 23 of 167
May 14, 2014
1.8
Connecting Your PC to the Module
With the module securely mounted, connect your PC to the CFG
(Configuration/Debug) port using an RJ45-DB-9 Serial Adapter Cable and a Null
Modem Cable.
1 Attach both cables as shown.
2 Insert the RJ45 cable connector into the CFG port of the module.
3 Attach the other end to the serial port on your PC.
This manual is related to the following products: