PLANET XRT-401E - Manual (Page 8)

ƒ Off - Corresponding LAN (hub) port connection is using
10Base-T.
Š LNK / ACT
ƒ On - Corresponding LAN (hub) port is active.
ƒ Off - No active connection on the corresponding LAN (hub) port.
ƒ Flashing - Data is being transmitted or received via the
corresponding LAN (hub) port.
Rear Panel
Rear panel Port and Button Definition
Port Description
LAN (1-4) Connect your LAN’s PCs, printer servers, hubs and switches etc.
WAN Connect your xDSL or Cable modem and is linked to the Internet.
RESET
This button has two (2) functions:
Š If problems occur with your router, press the router’s reset button
with a pencil tip (for less than 3 seconds) and the router will re-boot
itself, keeping your original configurations.
Š If problems persist or you experience extreme problems or you
forgot your password, press the reset button for longer than 3
seconds and the router will reset itself to the factory default settings
(warning: your original configurations will be replaced with the
factory default settings)
12V DC DC Power in.
1.5 Getting Started
This is a step-by-step instruction on how to start using the router and get connected to the
Internet.
1) Setup your network as shown in the setup diagram below.
8