PLANET XRT-401E - Manual (Page 18)

2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your
ISP should provide all the information required in this section.
Parameter Description
PPTP Account Enter the PPTP Account provided by your ISP for the PPTP
connection.
PPTP Password Enter the Password provided by your ISP for the PPTP
connection.
Retype Password Re-enter the Password for confirmation.
Service IP Address Specify PPTP Server IP address that you want to connect to.
My IP Address This is the IP address that your ISP has given you to establish
a PPTP connection.
My Subnet Mask Enter the Subnet Mask provided by your ISP.
(e.g. 255.255.255.0)
Connection ID This is the ID given by ISP. This is optional.
MTU This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do
not wish to set a maximum packet size. (The default setting is
1460)
Maximum Idle Time You can specify an idle time threshold (seconds) for the WAN
port. This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection with your ISP. (The
default settings is 300 seconds)
18