PLANET XRT-401E - Manual (Page 51)

Gateway Specify the other gateway IP that will route the
packets to the destination.
Add
Click “Add” to add this routing information.
3.6.3 Dynamic Routing
Dynamic Routing can be used to cache routes learned by routing protocols, thus allowing
the automation of static routing maintenance. The router, using the RIP (Routing
Information Protocol) protocol, determines the network packet's route based on the fewest
number of hops between the source and the destination. In this case, you could
automatically adjust to physical changes in the network layout.
Parameter Description
Working Mome Specify your XRT-401E work as Router or Gateway.
Listen Mode Select the RIP version, and to start or stop RIP based
on the Global RIP mode selected.
Supply Mode This parameter determines if the XRT-401E includes
the router to this remote node in its RIP broadcasts or
RIP Multicast. Select the Mode you want to use.
3.7 UPnP
3.7.1 UPnP
With UPnP, all PCs in you Intranet will discover this router automatically. So you do not
have to do any configuration for your PC and can access the Internet through this router
easily.
51