PLANET XRT-401E - Manual (Page 37)

Parameter Default Description
IP address 192.168.0.1 This is the router’s LAN port IP address (Your
LAN clients default gateway IP address)
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment
DHCP Server Enabled You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll
have to manually set your LAN client’s IP
addresses; make sure the LAN Client is in the
same subnet as this broadband router if you want
the router to be your LAN client’s default
gateway.
IP Pool
Starting/Ending
Address
The IP range is
from 192.168.0.2
to 192.168.0.254.
You can select a particular IP address range for
your DHCP server to issue IP addresses to your
LAN Clients.
Lease Time The DHCP when enabled will temporarily give
your LAN clients an IP address. In the Lease
Time setting you can specify the time period that
the DHCP lends an IP address to your LAN
clients. The DHCP will change your LAN client’s
IP address when this time threshold period is
reached
37