PLANET XRT-401E - Manual (Page 28)

would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. The WAN
settings offer the following selections for the router’s WAN port, Dynamic IP, Static IP
Address, PPPoE, PPTP, L2TP and DNS.
Parameter Description
3.2.1 Dynamic IP Your ISP will automatically give you an IP address
3.2.2 Static IP address Your ISP has given you an IP address already
3.2.3 PPPoE Your ISP requires PPPoE connection
3.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
3.2.5 L2TP Your ISP requires L2TP connection.
3.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address.
Some ISP’s may also require that you fill in additional information such as MAC address
(see chapter 2 “Cable Modem” for more detail). Select Big Pond if your ISP requires the Big
Pond protocol to connect you to the Internet.
28