beautypg.com

Chapter 3 advance features, 1 system – PLANET XRT-401E User Manual

Page 21

background image

as: Special Applications, Port Mapping, DMZ, Virtual Servers, ALG, and Firewall option

.

Below is a general description of what advance functions are available for this broadband

router.

Parameter Description

3.1 System

This section allows you to set XRT-401E’s system settings, password
and Remote Management Administrator, it also allows you to check
system status and log, and provide you the configuration tools.

3.2 WAN

This section allows you to select the connection method in order
to establish a connection with your ISP (same as the Wizard section)

3.3 LAN

You can specify the LAN segment’s IP address, subnet Mask,

enable/disable DHCP and select an IP range for your LAN, you also

can check DHCP client list in here.

3.4 NAT

You can configure the Virtual Server, Special Applications, Port
Mapping, ALG and DMZ functions in this section. This allows you to
specify what user/packet can pass your router’s NAT.

3.5 Firewall

The Firewall section allows you to configure Firewall, Client Filtering,
URL Filtering and MAC Control.

3.6 Routing

You can configure Static Routing in this section, and check the
concurrent Routing Table.

3.7 UPnP

The UPnP section allows you to enable and configure UPnP function.

3.8 DDNS

You can configure DDNS service in this section.

Select one of the above advance features selections and proceed to the manual’s relevant

subsection.

3.1 System

This section allows you to set XRT-401E’s system settings, password and Remote

Management Administrator, it also allows you to check system status and log, and provide

you the configuration tools.

Parameter Description

3.1.1 System Status

You can check system information in here, including

system status and concurrent hardware information.

3.1.2 System Settings

This section Includes Host Name, Domain Name, Time

Zone, Daylight Saving and NAT enable/disable.

3.1.3 Administrator
Settings

Allows you to set user name, password and the idle time

out, you can specify a Host IP address that can perform

remote management functions.

3.1.4 Firmware Upgrade

This section allows you to upgrade the router’s firmware

21