PLANET XRT-401E - Manual (Page 50)

Parameter Description
Destination LAN IP The IP address where packets will go to.
Subnet Mask The subnet mask of the destination IP address.
Gateway The gateway that the packets will pass by during
transmission.
Metric Metric represents the “cost” of transmission for routing
purposes. IP Routing uses hop count as the
measurement of cost.
Interface The interface that the packets pass through on the
device.
3.6.2 Static Routing
This page is used to configure the routing information. Here you can add / delete IP routes.
Parameter Description
Destination LAN IP, Subnet
Mask
Specify the destination LAN IP where the packets will
be routing to packets will be routing to.
50