PLANET XRT-401E - Manual (Page 14)

Chapter2 Wizard
The Wizard section is designed to get you using XRT-401E as quick as possible. In the
Wizard, you are required to fill in only the information necessary to access the Internet.
Once you click on the Wizard in the web page, you should see the screen below.
Step 1) Host Settings
The Host Settings allows your router to set up Host name and Domain name, it also can set
up its Time Zone and Daylight Saving Time, these will affect functions such as Log entries
and Firewall settings.
Parameter Description
Host Name This is optional. You can specify a Host name for XRT-401E.
Domain Name This is optional. You can specify a Domain name to annotate
your LAN area.
Time Zone Select the time zone of the country where you currently are. The
router will set its time based on your selection.
Daylight Savings The XRT-401E can also take Daylight savings into account. If
you wish to use this function, you must select the enable box to
enable your daylight saving configuration.
Click on NEXT to proceed to the next page (step 2) WAN Settings.
Step 2) WAN Settings
In this section you have to select one of these types of connections that you will be using to
connect your XRT-401E’s WAN port to your ISP (see screen below).
"Note
Different ISP’s require different methods of connecting to the Internet,
please check with your ISP as to the type of connection it requires.
14