PLANET GRT-501 - Manual (Page 7)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
„ Fully ATM protocol stack implementation over G.SHDSL.bis
„ PPPoA and PPPoE support user authentication with PAP/CHAP/MS-CHAP
Hardware Specification
Product G.SHDSL.bis Bridge Router
Model GRT-501
Hardware
Standard
Compliant with ITU-T G.991.2 Standard Annex A/B
Compliant with G.SHDSL.bis Annex A/B/F/G
TC-PAM Line Code
Symmetric data transmission speed up to 5.7 Mbps on 2-wire
Multi-range from 192kbps to 5.7Mbps
Protocol RFC 1577 - Classical IP over ATM (RFC 1577)
RFC 2364 - PPP over ATM
RFC 1483/2684 - Ethernet over ATM
RFC 2516 - PPP over Ethernet (fixed and dynamic IP)
RFC 2364 - PPP over ATM (fixed and dynamic IP)
AAL and ATM Support Support up to 8PVCs
ATM Forum UNI 3.1/4.0 PVC
Support OAM F4 / F5 AIS/RDI and loopback
VC multiplexing and SNAP/LLC
Integrated ATM QoS support (UBR,CBR,VBR-rt, and VBR-nrt)
LAN Port 1 x 10Base-T/100Base-TX ( Auto-Negotiation, Auto MDI/MDI-X)
Console 1 x RS-232 (DB9)
Button 1 x Reset Button
LED Indicators PWR, WAN LNK/ACT, LAN 10M/100M, ALM
Software
Protocol
IEEE 802.1D transparent learning bridge
IEEE 802.1Q VLAN
Support IP/TCP/UDP/ARP/ICMP/IGMP protocols
IP routing with static routing and RIPv1/RIPv2
IP multicast and IGMP proxy
Network address translation (NAT/PAT)
DMZ host/Multi-DMZ/Multi-NAT function
Virtual Server (RFC1631)
DNS relay and caching
DHCP server, client and relay
Security
Built-in NAT Firewall
PPP over PAP (RFC1334)
PPP over CHAP (RFC1994)
Password protection for system management
VPN
VPN (PPTP/L2TP/IPSec) pass-through
Management
Web-based configuration
Command-line Interpreter(CLI) via Console
Command-line Interpreter(CLI) via Telnet
Software upgrade via web-browser/TFTP server
SNMPv1 and v2
Environment Specification
Dimension (W x D x H)
145 x 188 x 33mm
Power 9V DC, 1A
Temperature:
Humidity Operating: 0~45 degree C, 0%~ 90% (non-condensing),
Storage: -10~70 degree C, 0~95% (non-condensing)
Emission FCC, CE
- - 6