PLANET GRT-501 - Manual (Page 32)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 31
4.2.8 Virtual Server
For example:
Specific ports on the WAN interface are re-mapped to services inside the LAN. As only
69.210.1.8 (e.g., assigned to WAN from ISP) is visible to the Internet, but does not actually
have any services (other than NAT of course) running on gateway, it is said to be a virtual
server. Request with TCP made to 69.210.1.8:80 are remapped to the server 1 on
192.168.0.2:80 for working days from Monday to Friday 8 AM to 6PM, other requests with
UDP made to 69.210.1.8:25 are remapped to server 2 on 192.168.0.3:25 and always on.
You can setup the router as Index 1, protocol TCP, interface WAN1, service name test1,
private IP 192.168.0.2, private port 80, public port 80, schedule from Day Monday to Friday
and time 8:0 to 16:0 and index 2, protocol UDP, interface WAN1, service name test2,
private IP 192.168.0.3, private port 25, public port 25, schedule always.
Web UI Configuration
Step 1.
Click Virtual Server to configure the
parameters.
Press Modify for modify #1.
Step 2.
Type the necessary parameters then click
OK.
For Example:
Protocol: TCP
Interface: WAN1
Service Name: FTP
Private IP: 192.168.0.100
Private Port: 21 ~ 21
Public Port: 21 ~ 21
Schedule: Always