PLANET GRT-501 User Manual

Page 19

GRT-501 G.SHDSL.bis Bridge Router User’s Manual

- -

Step 3.

Assign the IP pool for your DHCP
server. Click Next.

For example:
If the LAN IP address is
192.168.0.1, the IP range of LAN is
192.168.0.2 to 192.168.0.51. The
DHCP server assigns the IP form
Start IP Address to End IP Address.
The legal IP address range is form 0
to 255, but 0 are reserved as
network name and 255 are reserved
for broadcast. It implies the legal IP
address range is from 1 to 254. That
means you cannot assign an IP
greater than 254 or less then 1.

Lease time 72 hours indicates that
the DHCP server will reassign IP
information in every 72 hours.

Step 4.

Enter Parameters in BASIC –
STEP4
Wan Parameters;
VPI: 0
VCI: 32
AAL5 Encapsulation: LLC
Protocol: IPoA , EoA , IPoA + NAT
or EoA + NAT

Click Next to setup the IP
parameters.

Step 5.

Enter Parameters in WAN setting.
1. IP Address: 10.1.2.1
2. Subnet mask: 255.255.255.0
3. Gateway: 10.1.2.2
Your ISP will provide above
information to you.
4. DNS Server 1: 168.95.1.1
Your ISP will provide at least one
DNS Server IP address.
5. Click Next.

Step 6.

The screen will prompt the new configured parameters. Check the parameters and click Restart. The router
will reboot with the new setting or press Continue to configure another parameters.