5 ethernet, Web ui configuration – PLANET GRT-501 User Manual
Page 27
GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- -
26
Step 4.
Port-Based VLANs are VLANs where the
packet forwarding decision is based on
the destination MAC address and its
associated port.
Click Port-Based VLAN to configure the
router.
Step 5.
Press Finish to finish setting.
The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in
EPROM.
Press Restart to restart the router working with new parameters or press Continue to setup another
parameter.
4.2.5 ETHERNET
This page of function let user configure the media type of Ethernet.
Web UI Configuration
Step 1.
Click ETHERNET to configure Ethernet.
Here are several options:
1. AutoSense
2. 100Base-TX full duplex
3. 100Base-TX helf duplex
4. 10Base-T full duplex
5. 10Base-T helf duplex
Step 2.
Press Finish to finish setting.
The screen will prompt the parameters that will be written in EPROM. Check the parameters before writing in
EPROM.
Press Restart to restart the router working with new parameters or press Continue to setup another
parameter.