PLANET GRT-501 - Manual (Page 40)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 39
1. Load Factory Default: It will load the factory default parameters to the gateway.
Note: This action will change all of the settings to factory default. On the other hand,
you will lose all the existing configured parameters.
2. Restore Configuration: Sometime the configuration crushed occasionally. It will help
you to recover the backup configuration easily.
„ Click Finish after selecting Restore Configuration.
„ Browse the route of backup file then press Finish. The router will automatically
restore the saved configuration.
3. Backup Configuration: After configuration, suggest using the function to backup your
router parameters in the PC. Select the Backup Configuration and then press Finish.
Browse the place of backup file named backup. Press Finish. The router will
automatically backup the configuration.
4.5.3 Upgrade
You can upgrade the Firmware by using the upgrade function. Press Upgrade in UTILITY.
Browse the file and press OK button to upgrade. The system will reboot automatically after
finishing.