PLANET GRT-501 - Manual (Page 28)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 27
4.2.6 Route
If the GRT-501 is connected to more than one network, it may be necessary to set up a
static route between them. A static route is a pre-determined pathway that network
information must travel to reach a specific host or network.
With Dynamic Routing, you can enable the GRT-501 to automatically adjust to physical
changes in the network’s layout. The Router, using the RIP protocol, determines the
network packets’ route based on the fewest number of hops between the source and the
destination. The RIP protocol regularly broadcasts routing information to other routers on
the network.
Web UI Configuration
Step 1.
Click Route to modify the routing
information.
Step 2.
To modify the RIP (Routing information
protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify