PLANET GRT-501 - Manual (Page 22)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 21
4.2 Advanced Setup
Advanced configuration contains SHDSL.bis, WAN, Bridge, VLAN, Ethernet, Route,
NAT/DMZ and Virtual Server settings.
4.2.1 SHDSL.bis
Web UI Configuration
Step 1.
You can setup the Annex type, data rate
and SNR margin for SHDSL.bis
parameters in SHDSL.bis.
Click SHDSL.bis
Step 2.
Annex Type: There are foure Annex
types, Annex A (ANSI), Annex B (ETSI),
AnnexAF and Annex BG in SHDSL.bis.
Check with your ISP about it.
TCPAM Type: The default option is
Auto. You may assign the different type
manually by click the caption TPCAM-16
or TPCAM-32
Data Rate : you can setup the
SHDSL.bis data rate in the multiple of
64kbps.
The default data rate is 5696Kbps (n=89).
Under Annex F/G
TCPAM32 : data rate is 768Kbps ~ 5696Kbps (Nx64kbps, N=12~89)
TCPAM16 : data rate is 192Kbps ~ 3840Kbps (Nx64kbps, N=3~60)
Under Annex A/B
TCPAM16 : 192Kbps ~ 2304Kbps (Nx 64kbps, N=3~36)
For adaptive mode, you have to setup n=0. The router will adapt the data rate according to the line status.
Step 3.
The screen will prompt the parameters
that will be written in EPROM. Check the
parameters before writing in EPROM.
Press Restart to restart the router
working with new parameters or press
Continue to setup another parameter.