PLANET GRT-501 - Manual (Page 25)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 24
4.2.3 Bridge
If you want to setup advanced filter function while GRT-501 is working in bridge mode, you
can use BRIDGE menu to setup the filter function, blocking function.
Web UI Configuration
Step 1.
Click Bridge to start Bridge configuration.
Step 2.
Press Add in the bottom of web page to
add the static bridge information.
If you want to filter the
designated MAC
address of LAN PC to access Internet,
press Add to establish the filtering table.
Put the MAC address in MAC Address
field and select Filter in LAN field.
If you want to filter the
designated MAC
address of WAN PC to access LAN,
press Add to establish the filtering table.
Key the MAC address in MAC Address
field and select Filter in WAN field.
For example:
If your VC is setup at WAN 1, select WAN
1 Filter.
Step 3.
Press Finish to finish setting.
The screen will prompt the parameters
that will be written in EPROM. Check the
parameters before writing in EPROM.
Press Restart to restart the router
working with new parameters or press
Continue to setup another parameter.