PLANET GRT-501 - Manual (Page 21)

GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- - 20
STU-C (CPE) side
Step 1.
Click Bridge and CPE Side to setup
Bridge mode of the Router and then click
Next.
Step 2.
Enter LAN Parameters
1. IP: 192.168.0.2
2. Subnet Mask: 255.255.255.0
3. Gateway: 192.168.0.1
Host Name: SOHO
Enter WAN Parameters
1. VPI: 0
2. VCI: 32
3. Encapsulation: LLC
4. Click Next
Step 3.
The screen will prompt the new configured parameters. Check the parameters and Click Restart. The router
will reboot with the new setting or press Continue to configure another parameters..
After rebooting, the GRT-501 will establish a connection and the PC1 and PC2 can access to each other.