PLANET ADN-4100 - Manual (Page 98)

In this page, you can upgrade the firmware of the device. To update the firmware,
do as follows:
Step 1 Click Browse…to select the file.
Step 2 Select Clear Config.
Step 3 Click Update Firmware to update the configuration file.
The device loads the file and reboots automatically.
Caution:
Do not turn off your device or press the Reset button when the procedure
is in progress.
3.4.3
37B
Access Controls
Choose Management > Access Controls. The ACCESS CONTROLS page as
shown in the following figure appears:
This page contains Account Password, Services, and IP Address.
87