PLANET ADN-4100 - Manual (Page 14)

3
The following table describes the LEDs of the device.
LED Color Status Description
On
The device is powered on and the
initialization is normal. Green
Off The power is off. PWR
Red On
The device is self-testing or self-testing is
failed.
Slow
Blinks
No signal is detected.
Fast
Blinks
The device is handshaking with the physical
layer of the office.
Link Green
On
The device is connected to the physical
layer of the office.
On
The Internet connection is normal in the
routing mode (for example: PPP dial-up is
successful), and no Internet data is being
transmitted.
Blinks
Internet data is being transmitted in the
routing mode.
Green
Off The device is in the bridge mode.
Data
Red On
The Internet connection fails after
successful synchronization in the routing
mode (for example: PPP dial-up is failed).
On The LAN connection is normal.
Blinks
Data is being transmitted through the LAN
interface, or the Internet data is being
transmitted in the bridge mode.
LAN4-1 Green
Off The LAN connection is not established.
On The WLAN connection has been activated.
Blinks
Data is being transmitted through the
WLAN interface.
WLAN Green
Off The WLAN connection is not activated.
Blinks
WPS is activated and the device is waiting
for negotiation with the clients. WPS Green
Off WPS is not activated.