PLANET ADN-4100 - Manual (Page 22)

3
2B
Web Configuration
This chapter describes how to configure the device by using the Web-based
configuration utility.
3.1
7B
Accessing the Device
The following describes how to access the device for the first time in detail.
Step 1 Open the Internet Explorer (IE) browser and enter
HU
http://192.168.1.1
UH
in the address bar.
Step 2 The LOGIN page as shown in the following figure appears:
In this page, enter the user name and the password. Then, click login.
The user name and the password of the super user are admin and admin
respectively.
The user name and the password of the normal user are user and user
respectively.
If the login information is incorrect, the page as shown in the following figure
appears:
11