PLANET ADN-4100 - Manual (Page 76)

To create a mapping group, do as follows:
Step 1 Enter the group name.
Step 2 Select interfaces from the Available Interfaces list and click the <-
arrow button to add them to the Grouped Interfaces list, in this way,
you can create the required mapping of the ports. The group name
must be unique.
Step 3 Click Apply to save the settings.
3.3.10.2
63B
IGMP Proxy
In the NETWORK TOOLS page, click IGMP Proxy. The page as shown in the
following figure appears:
IGMP proxy enables the device to issue IGMP host messages on behalf of hosts
that the system discovered through standard IGMP interfaces. The device serves
as a proxy for its hosts after you enable the function.
65