PLANET ADN-4100 - Manual (Page 97)

Button Description
Reboot Restart the device.
Backup Setting
Specify the path to back up the current configuration in
a configuration file on your computer. You can rename
the configuration file.
Update Settings
Click Browse… to select the configuration file of device
and click Update Settings to update the configuration
of the device.
Restore Default
Setting
Reset the device to default settings.
Caution:
Do not turn off your device or press the Reset button when the procedure
is in progress.
3.4.2
36B
Firmware Update
Choose Management > Firmware Update. The page as shown in the following
figure appears:
86