PLANET ADN-4100 - Manual (Page 43)

In the DHCP CLIENT CLASS LIST page, you can set an IP address range for
some specification device. The page as shown in the following figure appears:
The following table describes the parameters in this page.
Field Description
Client Class Name Enter the Client Class name
Min IP Address The IP Address for minimum
Max IP Address The IP Address for maximum
DNS Address Enter the DNS Address with the client class
In the LOCAL NETWORK page, you can assign LAN IP addresses for specific
computers according to their MAC addresses.
Click Add to add static DHCP reservation. The page as shown in the following
figure appears:
32