PLANET VIP-000 - Manual (Page 78)

VIP User ’s Manual
Command Line Interface 64
set h323 allow_call_wo_gk {true|false}
The set h323 allow_call_wo_gk command is used to inform the H.323 stack to allow imcoming
calls from a remote VIP which is not registered with a gatekeeper.
Syntax Description
true Allow calls from VIP that is not registered with a gatekeeper.
false Do not allow calls from VIP that is not registered with a gatekeeper.
Default
VIP allows calls from VIP that is not registered with a gatekeeper.
set h323 auto_answer {on|off}
The set h323 auto_answer command is used to enable or disable early call setup connection. If
disabled, the call is not set up until the user initiates the connection.
Syntax Description
on Enable H323 early call setup connection.
off Disable H323 early call setup connection.
set h323 call_name
This command is used to set a string that VIP will encapsulate in the H.323 Setup message it sends
to a remote VoIP device when initiating a call.
set h323 call_name call_name
Syntax Description
call_name Call name, up to 30 characters, to be encapsulated in the 3rd alias field of
srcAddress field of the H.323 call setup message
Default
Null
set h323 cisco_t38
Cisco FoIP solutions support standard T.38 fax. However, they expect their peer gateways initiating
Open Logical Channel (OLC) request, when it determines itself as a H.323 Master. For the ITG to
be aware of initiating OLC request when interoperating with Cisco gateway, this command is pro-
vided.
set h323 cisco_t38 {on | off}
Syntax Description