PLANET VIP-000 - Manual (Page 100)

VIP User ’s Manual
Command Line Interface 86
milliseconds Time in milliseconds, ranging from 0 to 65535.
Default
50
set port port em size_detect
This command is used to specify the period of time the M-lead needs to be off-hook before an in-
coming call is declared.
set port port em size_detect milliseconds
Syntax description
milliseconds Time in milliseconds, ranging from 0 to 65535.
Default
150
E&M Immediate Start Signaling Configuration Commands
The E&M immediate start signaling configuration commands are used to define parameters specific
to E&M immediate start interface. These commands apply to E&M Immediate Start signaling proto-
col only.
set port port emi glare_report
This command is used to set a time period during which, if glare is detected, the interface will stay
off-hook and generate congestion tone.
set port port emi glare_report milliseconds
Syntax description
milliseconds Time in milliseconds, ranging from 0 to 65535.
Default
5000
set port port emi wait_dsp_ready
This command is used to set a time period (in milliseconds) to wait for the DSP software to be
ready before digit collection can be enabled. If glare is detected during this period, the interface will
stay offhook and generate congestion tone.
set port port emi glare_report milliseconds
Syntax description
milliseconds Time in milliseconds, ranging from 0 to 65535.
Default