PLANET WAP-7500 - Manual (Page 39)

4.4 Link Test
Under Base Station, CPE mode when Antenna Alignment Tool is not available, Link Test provides
another option to check the signal strength towards the connecting device. Open “Link Test” in
“Wireless” as below, and click “Refresh” to view the current signal strength of wireless connectivity.
The table will be updated every 3 seconds. If the signal is not so good, align the antenna manually.
Figure 28 Link Test
4.5 Link Aggregation
Link Aggregation combines two physical network links into a single logical link for increased bandwidth.
With it enabled, users can increase the capacity and availability of the communications channel between
devices (both switches and end stations). Besides, link aggregation also provides load balancing.
Open “Basic” in “System”, Link Aggregation is as below:
Page 39